Profile - FineParts Co., Ltd.

Company Profile

Company name	FineParts Co., Ltd.
Founded	November 1987
Capital	14 million JPY
Representative	Yoshimitsu Kuroda
Employees	39 (as of April 2021)
Company address	2-17-5 Nishiterao, Kanagawa-ward, Yokohama 221-0001 Japan TEL：+81-45-423-6400　FAX：+81-45-423-6433

History and future of FineParts

Our company was established in 1987 with just three coiling machines. Approaching our 30th anniversary, we have now grown up owning a hundred coiling machines.
In the year 2000, we were able to shorten the lead time by the start of plating in-house. FineParts is proud of having the best quality and the highest production capability in the field of the ultrafine springs.
While receiving demands from manufacturers all over the world who are concerned with the further decrease in size and further refinement of products, we continue to handle the challenges of FineParts, WE WILL NEVER STOP MOVING FORWARD.

1987	Founded in Honhaneda, Ota-ward, Tokyo with 14 million yen in capital. At this time, we had three coiling machines and a location size of approximately 33 square meters. We started to manufacture springs primarily for contact probes and springs for connectors.
1990	Moved our location to Chidori, Ota-ward, Tokyo. At this time, we had 15 coiling machines and a location size of approximately 99 square meters.
1992	Moved and established our company’s building in Kaminokicho, Kanagawa-ward, Yokohama. At this time, we had 30 coiling machines and a location size of approximately 297 square meters.
1996	Developed a new manufacturing method of springs for gel ink ballpoint pen tips, and expanded our market inside and outside Japan.
1997	Succeeded in developing springs with an outer diameter of 80 microns. At this time, we had 50 coiling machines.
2000	Moved and established our current location in Nishiterao, Kanagawa-ward, Yokohama. Our current location is a space with a size of approximately 990 square meters. We started our company’s plating services.
2006	Began mass production of springs with an outer diameter of 70 microns.
2007	Began mass production of springs with an outer diameter of 65 microns. At this time, we had 100 coiling machines.
2008	Acquired KES environmental managements system standard STEP1
2012	Began mass production of springs with an outer diameter of 60 microns.